I-ANDANTEX NT280-10 iqonga elijikelezayo elingenanto kwisixhobo se-laser welding Featured Image

I-ANDANTEX NT280-10 inqanaba lokujikeleza elingenanto kwisixhobo sokuwelda i-laser

Inkcazelo emfutshane:

Igama lemveliso:Iqonga elijikelezayo elinomgongxo

Inombolo Yenqaku:NT200

Uluhlu lwenkcazo:60-450

Uluhlu lwesantya:10/18

Uluhlu oluchanekileyo:±0.5arcmin

Iwaranti:iminyaka emibini

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

ANDANTEX NT280-10 umngxuma iqonga rotary kwi laser welding izixhobo-01

Iimbonakalo

1. Ubume beqonga elijikelezayo elinomqolo liyi-cylindrical, umlinganiselo we-diameter yangaphandle ukuya kwi-diameter yangaphakathi yi-1.05, kwaye ithatha i-3/4 yecandelo le-arc, elinokuthi liqhube kakuhle kwaye liguquguquke xa lisebenza.

2. Isakhiwo sangaphakathi seqonga elijikelezayo elinomngxuma lithatha idizayini yesakhiwo esivaliweyo, esinokuthi siphephe ngokufanelekileyo uthuli kunye ne-debris ekungeneni ngaphakathi kunye nokubangela ukungasebenzi.

3. Iindawo eziphambili zeplatifomu ejikelezayo ejikelezayo zenziwe ngetsimbi yensimbi ephezulu, enokuqinisekisa ukuba ayiyi kuphazamiseka okanye yonakaliswe xa isebenza, kwaye akuyi kubakho ingxolo kunye nokungcangcazela ngexesha lenkqubo yokusetyenziswa.

4. Indlela yokufakela iqonga elijikelezayo elinomngxuma linokudityaniswa kwaye lidityaniswe.

Usetyenziso

Izigaba ezijikelezayo ezingenanto zisetyenziswa kwizixhobo ze-laser welding ngokuyintloko ukujikeleza i-workpiece ukuze kuphunyezwe ukukwazi ukulawula ubungakanani kunye nokumila kwechibi lokunyibilika ngexesha lenkqubo ye-laser welding.Ngexesha lenkqubo ye-laser welding, i-hollow rotary stage ingasetyenziselwa ukujikeleza i-workpiece yokufudumeza okufanayo, ngaloo ndlela isusa uxinzelelo lwe-thermal kunye nokuguqulwa kunye nokugcina ukuqina kunye nokuchaneka kwe-joint welded.Ukongeza, inqanaba elijikelezayo elinomgobo lingasetyenziselwa ukukhokela umqadi we-laser ukufezekisa izikhundla ezahlukeneyo ze-weld kwaye iyakwazi ukwenza inkqubo ye-welding ye-laser izinzile ngokulawula isantya, ngaloo ndlela iphucula umgangatho kunye nokusebenza kakuhle kwe-weld.